K-Span Roofing Systems Sharjah

Because the panels are roll-formed from steel coil and seamed on site, a K-Span roof goes up quickly: once the foundations or walls are ready, we can typically erect up to 1,000 square metres in a few days. In Sharjah, that speed is valued by businesses in the Industrial Area, Sajja, the SAIF Zone and Hamriyah Free Zone, where warehouses and workshops need to be operational quickly. Our own facility is in Sajja, so equipment and crews are close to most industrial sites in the emirate. The programme also includes foundations and any Sharjah Municipality or free zone approvals, which we plan from the start.

Yes. An automated seaming machine folds the edges of neighbouring panels together to form a continuous, watertight roof with no nuts or bolts through the seams, leaving almost nowhere for water to get in. The arch profile sheds rain and dust quickly, and gutters carry water away. That makes K-Span a reliable choice for Sharjah warehouses and storage buildings, where goods must stay dry in winter rain. The gable ends can be closed with cladding, roller doors or louvres, depending on how the building is used and how much ventilation it needs.

Yes. We apply closed-cell polyurethane foam insulation to the underside of the K-Span roof, which provides excellent thermal resistance and keeps Sharjah warehouses and workshops much cooler in summer. Without it, the steel roof radiates heat into the building; with it, temperatures inside drop noticeably and air-conditioning costs less to run. The foam also reduces condensation, protecting stored goods, and dampens the noise of rain. Because our workshop is in Sajja, insulation can be applied soon after the roof is erected, keeping the overall programme short.

Our K-Span roofing systems can span up to 35 metres with no internal columns, depending on the steel gauge and arch profile. For Sharjah's industrial users, that means warehouses, workshops and covered yards with completely open floors, so racking, forklifts, trucks and machinery can move freely. The achievable span depends on the building's width and height, the site's wind load and any equipment to be suspended from the roof. Wider buildings can be formed by joining spans side by side. We design each structure for its site and use.